VENTUS Supply and exhaust floor mounted unit VVS040c HFXVH-FXV, Airflow: 3200m³/h, EP: 300Pa

Compact AHU's
AHU Mount Type	Compact floor mounted
Air flow [m³/h]	3200m³/h
External pressure [Pa]	300Pa
Size L x W x H [mm]	3022 x 1174 x 672mm
Heat recovery	heat pump combined with rotary regenerator
Heating	2 heaters
Filter type/class	mini pleat F7/ M5
Energy efficiency class	E
Sound power level [dBA]	52dB

Stock: In Stock
Model: 13577327

Based on 0 reviews. - Write a review

69,652.49zł

Ex Tax: 56,628.04zł

Available Options

Inspection side

Qty

Add to Cart

Buy Now Ask Question

Add to Wish List Compare this Product

Description

The compact units in the floor mounted version are intended for installation in technical rooms as well as outside the building.

The units are made of polyurethane foam insulation panels covered with Aluzinc sheets (AZ 150). The panels are attached to a steel supporting structure that ensures the rigidity of the entire unit.

Features:

40mm insulated walls, double skin made of steel
Unit Power Supply 400V/3ph/50Hz
Casing anti-corrosion protection: Aluzinc AZ 150. Corrosion resistance (salt spary test): over 2400 hours
In case of delivery with controls a base unit fully wired, with pre-configured controller and EC motors drives
Energy recovery efficiency exceeding 86% (for EC 1253/2014 conditions)

The units are equipped with:

- energy recovery - heat pump combined with rotary regenerator

- EC motors

- MINI-PLEAT filters

- multifunctional controls

The units are configured and ready for operation immediately after connecting (Plug&Play).

The compact units in the suspended version are equipped with a rotary heat wheel, ensuring heat recovery efficiency of 86%. The multi-fan assembly of the fan wall type ensures minimal energy consumption and optimal device operating parameters.

Download detailed PRODUCT CARD

PARAMETERS

Power supply
Supply voltage	3x400V AC +N+PEV
Supply fan section
External static pressure	300Pa
Motors	2 x EC 0.7kW
Exhaust fan section
External static pressure	300Pa
Motors	2 x EC 0.7kW
Energy recovery
Recovery type	heat pump combined with rotary regenerator
Air in temp.	-20°C
Air in hum.	90%
Air out temp.	-9.0°C
Air out hum.	90%
Heater
Heater type	electric
Nominal power	16.1 kW
Air in temp.	-20°C
Air out temp.	-5°C
Air out hum.	23%
Supply	400V +PE
Heater 2
Heater type	electric
Nominal power	10.3 kW
Air in temp.	14.4°C
Air in hum.	21%
Air out temp.	24.0°C
Air out hum.	12%
Supply	400V +PE